- High strength pultruded composite material is used for external unit panels and structural elements.
- Mould formed, hand laid, heavy-duty fibreglass reinforced polyester (FRP) with smooth internal finish, is used for the cold water basin and fan cylinder.
- Option: Tower without cold water basin for on-site assembly on concrete tank. Triple fan units are always supplied without water basin.
- Our heat transfer media is Versapak fill. Cross fluted fill design in easy to handle, lift and remove blocks. In polypropylene, which will not rot, decay or decompose. Optional in flame-retardant material. Sheet spacing is 19 mm.
- Use 12 mm sheet spacing for clear water applications
- Choose FRP fill for dirty water applications: includes individual waved FRP panels and a telescopic fill support. Panels are easy to inspect and clean, eliminating the need for frequent fill replacement.
- For operation above 55°C, try our optional high temperature fill, usable with intake water up to 60°C.
- RCT fan system features low kW and noise axial fan(s) in corrosion resistant aluminum, encased in FRP fan cylinder with removable fan guard. Together with the stainless steel fan shaft and heavy duty ball bearings and extended lubrication lines, this guarantees optimal and year-round operational efficiency.
- Models RCT-2118 and 2129 use direct drive motor.
Larger units have the fan motor outside the discharge air stream and use V-belt drives. This drive system is encased in hot-dip galvanised steel with access door protected with the Baltibond hybrid coating.
- Our drift eliminators come in UV-resistant plastic, which will not rot, decay or decompose and their performance is tested and certified by Eurovent. They are assembled in easily handled and removable sections, for optimal internal access.
- Easy removable UV-resistant plastic combined inlet shields at air inlet. Sunlight block to prevent biological growth in tower, air filter and water splash-out stop.
These consist of:
- Spray branches with non-clog plastic nozzles secured by rubber grommets. Tool free branch removal for easy inspection and flushing.
- Flanged inlet and outlet connections.
- Easy accessible sloped cold water basin, including anti-vortexing stainless steel strainer, make up and overflow connection.
- Easy no-tool removal of one side panel gives complete access to drift eliminators, spray system and fill.
Interested in the RCT cooling tower? Contact your local BAC representative.